Page 195 - ERMIS Accessories

Quality monitoring 8

Batch control - Soil test for washer-disinfector
REF pack. unit

Inefficient cleaning can put disinfection and
sterilization procedures at risk. A poorly
functioning washer-disinfector can leave behind
microscopic debris that can severely compromise
both the disinfection and sterilization process.
One of the best and easiest ways to check
whether instruments are being cleaned effectively
is to present the cleaning equipment with a
physical challenge such as the cleaning efficacy
tests described in BS2745(9), ISO/TS
15883-5:2005(10) and UK Guidance Document
HTM2030(11).
The Browne Washer-Disinfector Test Soil is
designed to simulate the soiling that naturally
occurs during theatre use and performs in an
equivalent manner to the Edinburgh soil. The
Browne Soil Test is supplied in powder form as
individual test pots. One pot, one test. Simply add
water to the fill line, replace the cap, shake
vigorously and apply to the test load with the
brush provided. Following a 30-minute** drying
period at room temperature, the test load should
be cleaned using normal procedures and then
inspected for residual soil. Detailed instructions
for use included in each box.
The bright red colour of the Browne Test Soil
allows easy identification of areas that have not
been properly cleaned, providing a visual analysis
of equipment efficiency.
Non-toxic; contains no blood products.
** Drying time should not exceed 2 hours.

92-50002 10 ready to use tests / box 1 box
Quick protein test

92-01420 Miele quick protein test for surgical instruments, 1 set
set for 48 determinations

Dornierstraße 49 78532 Tuttlingen Tel.: +49 (0) 7461 964857-0 Fax: +49 (0) 7461 964857-99 www.ermis-medizintechnik.de E-mail: info@ermis-medizintechnik.de
195