Page 201 - ERMIS Accessories

Quality monitoring 8

Batch control - Three-Phase Sequential Indicator steam indicator - class 6
REF pack. unit

92-08027 The blue indicator changes to black when exposed 1 box
to steam but this change does not ensure the
sterilization process' efficiency (UNSAFE). The
green indicator changes to black when the
sterilization process has achieved 134 ºC for 5.3
minutes. This situation is named OK. Longer
exposure times or higher temperatures can be
determined when the yellow indicator changes to
dark brown up to black. This situation is named
OPTIMUM.

250 pcs. / box
for steam sterilization

Batch control - Des Check for moist heat processes

Cycle verification indicators for use in moist heat
processes.
The Des Check range provides an accurate,
convenient method of routine control for moist
heat processes. When distributed throughout the
load, the indicators provide visual confirmation of
conditions achieved at point of placement. The
vivid colour change from yellow to blue gives clear
evidence of the conditions attained, thus allowing
a quick and easy assessment of the success of the
process.
Designed using advanced polymer technology to
withstand conditions present during moist heat
processes.
Des Check technology can be applied to different
time and temperature combinations.
Store at or below 0 °C.
According to ISO 11140-1 class 6.

100 indicator strips / set
sterilization for moist heat processes

92-50000 sterilizing program: 93 °C / 10 min. 1 box
92-50001 sterilizing program: 90 °C / 5 min. 1 box

Dornierstraße 49 78532 Tuttlingen Tel.: +49 (0) 7461 964857-0 Fax: +49 (0) 7461 964857-99 www.ermis-medizintechnik.de E-mail: info@ermis-medizintechnik.de
201